Thursday, February 26, 2015

Diamond Treatments and Synthetics

Diamond Treatments and Synthetics

Don't buy Diamonds or Diamond Jewellery, if below mention Treatment found in to stone you purchased as real natural diamonds or in real diamond prices, Ask for Refund Money. Also confirm with the suppliers from begining only if anything from following treatment found later of purchase also goods will be returned back.
  • Synthetics Diamonds
  • Laser Drilling
  • Irradiation
  • Clarity Enhanced
  • HTHP Process
  • CVD


Synthetic diamonds are identical to natural diamonds in their chemical characteristics. Methods to identify these exist and while they can be challenging and sometimes require expensive equipment, they are not thought to be a significant threat. However, very small diamonds that are set into jewelry can be much more difficult to determine their origin. Several diamond imitations, most notably cubic zirconia and synthetic moissanite, also exist. Neither of these poses great challenges in identification for an experienced jeweler or gemologist.

Laser Drilling:

When diamonds have black inclusions, they may not be very appealing to the eye. A process for removing these black inclusions developed in the 1960s and had widespread use by the 1970s. First, the laser is focused on an inclusion and a microscopic drill hole is left behind. This allows an acid bath to enter the diamond and remove the black imperfections. Although this is done in an effort to improve the appearance of the diamond, one can debate whether it really does since it leaves a drill hole and white inclusion where there used to be a black inclusion. Most laser drilling is easy to identify. However, some newer methods are more challenging since they do not leave a drill hole. Pricing is erratic. Some will lower the price of the diamond due to the drilling process, while others will not, arguing that the diamond may still have the same clarity grade but with slightly improved appearance. The important thing here is disclosure. In the U.S., it is required to disclose all diamond treatments. As long as consumers know what has been done, it is then up to them to make an informed buying decision.


Irradiation of a diamond is used strictly to create fancy color diamonds from off-color inexpensive diamonds. The process is controlled and stable. Resulting colors can be a wide range including green, yellow, orange, pink, and even red. Some irradiated diamonds are relatively easy to detect with simple tests and magnification while some require more extensive testing and equipment.

Clarity Enhanced

Clarity Enhancement is a process involving the use of a lead-based glass that through heating and pressure, is imparted into the diamond, effectively hiding the feathery type of inclusions. The film-like layer of glass is so fine and minute that it does not add significant weight (if any at all) to the diamond. The process is very effective in masking these inclusions. The correct term for this treatment is clarity enhanced, though many in the trade prefer to use the term “fracture-filled.” Diamonds do not have fractures that are being filled; they are cleavages (feathers), and gemologically speaking, there is a difference. As long as the treatment is properly disclosed, it again is up to educated consumers to decide if this product is for them.
It also is important to note that the treatment may not be stable. Care should be taken with these diamonds. They should not be placed in an ultrasonic cleaner. If repairs are to be done by a jeweler, the jeweler should be informed about the treatment as the high heat generated by a jeweler’s torch would damage the filler. It can be retreated if this should happen.


HTHP is the abbreviation for “High Temperature, High Pressure.” This treatment was perfected in the early 2000s for changing the color of a diamond using nothing more than controlled heating combined with high pressure. These expensive presses are effective on some diamonds and can change the color from a low yellowish or brownish color all the way up to D, E, or F colorless. The same process can also be used to change some diamonds into fancy color diamonds such as intense yellow or other colors. Detecting this treatment is the most challenging in the industry. Sometimes, microscopic signs are left behind that can be proof positive of the treatment. But other times, there are no signs. Sophisticated equipment can act as screeners for these treatments.


Chemical vapor deposition (CVD) can be used to produce a synthetic diamond by creating the circumstances necessary for carbon atoms in a gas to settle on a substrate in crystalline form.
CVD production of diamonds has received a great deal of attention in the materials sciences because it allows many new applications of diamonds that had previously been considered too difficult to make economical. CVD diamond growth typically occurs under low pressure (1–27 kPa; 0.145–3.926 psi; 7.5-203 Torr) and involves feeding varying amounts of gases into a chamber, energizing them and providing conditions for diamond growth on the substrate. The gases always include a carbon source, and typically include hydrogen as well, though the amounts used vary greatly depending on the type of diamond being grown. Energy sources include hot filamentmicrowave power, and arc discharges, among others. The energy source is intended to generate a plasma in which the gases are broken down and more complex chemistries occur. The actual chemical process for diamond growth is still under study and is complicated by the very wide variety of diamond growth processes used.


SRDC INDIA said...

Picture tag lines:
1) Fracture filling treatment
2) Color enhancement
3) Laser Drilling
4) Diamond grown by chemical vapor deposition (CVD)

IMAT CVD said...

Wow! It’s a nice blog; I was also seeking for that, thus i got right and useful information about different type of diamond. IMAT CVD also manufacture & suppliers of CVD & other Diamond

CVD Diamond Suppliers